Filter
Top Products
Operation Guide
B
ACL button
1. Slice the cover in the direction indicated by the arrow and remove it.
2. Install two AAA alkaline batteries, make sure the batteries point in the direction
marked in the battery compartment.
3. Use a thin object such as the tip of a pen to press the ACL button.
or when the remote control unit cannot be used to change the air
,
conditioner s setting.
Use two fresh leak-proof type-AAA alkaline batteries.
In replacing batterise, follow the instructiones as mentioned in the sub-
section How to install Batteries .
If you do not use the remote control unit more than 1 month, tale out the
batteries.
Replace the batteries when the remote control unit's display fails to light,
!
NOTE
When using the remote control unit, always point the unit's Transmitter head
directly at the air conditioner's receiver.
To ensure that the air conditioner operates correctly, DO NOT install the remote control
unit in the following places:
Behind a curtain or other places where it is covered;
Where it may become extremely hot or cold;
Where it may be subject to strong electromagnetic interference;
Where there is an obstacle between the remote control unit and the air conditioner;
In direct sunlight.
More than 8 meters away from the air conditioner;
In the path of the air conditioner's airstream;
REMOTE CONTROL UNIT
INSTALLATION POSITION
Trasmitter head
HOW TO INSTALL BATTERIES
A
B
Receive
Air conditioner
(indoor unit)
HOW TO USE THE REMOTE
CONTROL UNIT
Remote control
unit
DO NOT
8