Filter
Top Products
18
Getting Started
Changing the Instrument Settings
Binary Entry
For fields which require binary data entry, use to display the pop-
up menu.
The current setting is shown in a window at the top of the pop-up menu.
To move through the selected entry with the pop-up menu use and
see page 16.
Binary selection is achieved with = 0 and = 1. This operation
enters the selected character, 0 or 1, and moves to the next character.
This method allows rapid setting of binary words. For example:
To set the word 11110011 Use .
Selection of the last character changes the instrument setting to the new
value.
To exit the menu display without making the change, press .
Example:
The binary pop-up menu maybe used to set up a user defined word. In
this example the user defined word is an ATM payload background byte.
SET
<<<
>>>
CANCEL
SET