Filter
Top Products
56
Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev. D • 8/12
2284-935C
Log #5 (2284-705): Locate fl at areas on Log #1 and Log #3 that will be used to position Log #5. See Figure 11. Place
Log #5 into appliance as shown in Figure 12. Log #5 should contact base refractory and rest on the fl at areas as shown in
Figure 11. Burned portion of Log #5 should be in front of Log #1. Log should be about 1/2 inch from front outer edge of base
refractory when properly positioned. See Figure 12.
Figure 10. Figure 11.
BURNED
BURNED
PORTION
PORTION
FOR LOG #5
FOR LOG #5
FOR LOG #6
FOR LOG #6
Figure 12. Log #5 Placement
Figure 13. Log #6 Placement
Figure 14. Log Set Installed.
4
4
3
3
1
1
2
2
6
6
6
6
5
5
2
2
3
3
5
5
1
1
4
4
1
1
3
3
2
2
5
5
Log #6 (2284-706): Locate fl at areas on Log #2 and Log #3 that will be used to position Log #6. See Figure 11. Place Log
#6 into appliance as shown in Figure 13. Edge of Log #6, highlighted in Figure 10, will be about 1/2 inch from the center grate
tine on both HEIR36 and HEIR42. Right side of log contacts right grate tine.
FOR
FOR
LOG #5
LOG #5
EDGE OF LOG USED
EDGE OF LOG USED
FOR POSITIONING
FOR POSITIONING
BURNED
BURNED
PORTION
PORTION
1/2 INCH
1/2 INCH
2
2
1/2 INCH
1/2 INCH
HEIR42 SHOWN
HEIR42 SHOWN
LOG DOES NOT
LOG DOES NOT
CONTACT GRATE
CONTACT GRATE
TINE
TINE