Filter
Top Products
39
Heatilator •
HEIR36, HEIR42, HEIR50 • 2285-900 Rev. D • 8/12
Figure 9.6 Shipping Location of Non-Combustible Board
C. Installing Non-combustible Facing Material
WARNING! Risk of Fire!
• Follow these instructions exactly.
• Facing materials must be installed properly to prevent
fi re.
• No materials may be substituted without authorization
by Hearth & Home Technologies.
PERIMETER:
SECURE TO FRAMING WITH
DRYWALL SCREWS OR NAILS
(NOT INCLUDED)
INTERIOR:
SECURE WITH
SELF-TAPPING SCREWS
(IN MANUAL BAG ASSEMBLY)
Figure 9.7 Installing Non-Combustible Facing Material
• The fi nishing templates are shipped fastened to the top
surround. Remove fi nishing templates prior to installing
non-combustible board.
• Remove non-combustible facing pieces from back of
appliance. See Figure 9.6.
• Install non-combustible facing material to the appliance
using the screws supplied in the manual bag assembly.
• Center and attach two top panels to the framing
members. See Figure 9.7.
• Attach left and right side panels to framing members.
• Use fasteners from fastener packet (in manual bag) for
screws that secure to the fi replace. See Figure 9.7.
• Use drywall screws or nails to secure the perimeter of the
non-combustible facing materials to the wood framing.
See Figure 9.7.
• Use a wet or dry towel or soft brush to remove dust or
dirt from facing material.
• See Section 13 for fi nishing materials guidelines.