Heatiator C40 Indoor Fireplace User Manual


  Open as PDF
of 71
 
Page 36
Heatilator • Constitution EPA Fireplace • 480-1091D
4/20/11
B. Clearances
WARNING! Risk of Fire! -
DO NOT
-

2 in. (51 mm) min.
Attic
Insulation
Shield
Ceiling Firestop
(ceiling)
(roof)
(attic)
(ceiling)
Ceiling Firestop
Offset/Return with
hanger straps
Storm Collar
Roof Flashing
2 in. (51 mm) min.
2 in. min.
(51 mm)
Must have 2 in. (51 mm)
minimum clearance
to header
2 in. (51 mm) min.
2 in. (51 mm) min.
2 in. (51 mm) min.
2 in. (51 mm) min.
1 in. (25mm) to side of appliance
(except at nailing flanges where it is 1/2 in. [13 mm])
1 in. (25 mm) to back
of appliance
0 in.
to floor
0 in. to level
of standoffs
NOTICE: Chimney air kit is not shown, but is required.
Figure 6.2 Clearances to Combustible Materials
 previous next