Weatherproof Long
Range Wireless Chime
with Chime Extender
This package includes (Style of transmitter and chime may vary from illustration):
• Weatherproof Battery Operated Wireless Chime
• Extension Transmitter
• Hardware Pack
NOTE: This chime requires 3 “D” alkaline batteries for the chime and 4 “AAA”
alkaline batteries for the transmitter (Not Included).
© 2007 HeathCo LLC 598-1125-02
Your Heath
®
/Zenith Chime Extender allows you to add doorbell coverage to anywhere
on your property, up to 400 feet from extension transmitter, without the need to run
additional wires. The Chime Extender “listens” for your existing doorbell to ring, then
transmits a radio frequency signal to the Weatherproof Long Range chime unit.
1. Install batteries in transmitter and chime.
1. Remove battery cover from extender transmitter by pressing on the cover with
your thumb, then slide cover off as shown Figure 1.
2. Install 4 type “AAA” batteries (not provided). Make sure batteries are oriented
properly as shown in bottom of battery compartment (see Figure 2).
3. Remove screw on chime battery compartment. Using integrated finger tab, slide
cover downward and lift up to remove cover (see Figure 3).
4. Install 3 type “D” batteries (not provided). Make sure batteries are oriented properly
as shown in bottom of battery compartment (see Figure 4).
Figure 2
Battery
Orientation
Wire
Terminals
Removable
Microphone
Jumpers
Test Button
Microphone
Sensitivity
Adjustment
1 2 3 4 5 6 7 8
Figure 1
Wire Routing Slot