Heath Zenith 598-1000-07 Door User Manual


  Open as PDF
of 24
 
-6-
598-1000-07
C
h
i
m
e
V
o
l
u
m
e
12345678
3. To change the code, either:
• Addajumpertothesamelocationonboththepushbuttonandthechime
or...
• Removeajumperfromthesamelocationonboththepushbuttonandthe
chime or...
• Moveajumperonthepushbuttonfromonelocationtoanother.Movethe
corresponding jumper on the chime to match the new location in the push
button.
Example: Move jumper at location “5” to location “4” on both the push
button and the chime.
Note:Codepositions1through7mustbeexactlythesameforboththe
pushbuttonandchimeforthissystemtofunction.
Note: Unit will come factory set with jumpers in locations 5, 6, and 7 on the
push button and on the chime (see Figure 9).
The range of the wireless chime can vary with location, temperature, and
battery condition.
* Code Settings 1-7
Must Match Both Push
Button and Chime
Inside Push
Button
Inside Chime
Note: Some models might require the use of
tweezers to remove and replace the jumpers.
Figure 9
12345678
 previous next