Filter
Top Products
58
Heat & Glo • TRUE-36, TRUE-42, TRUE-50 • 2282-900 Rev. D • 8/12
Log Set Assembly: LOGS-TRUE50
Models: TRUE-50C, TRUE-50H, TRUE-50S
LOG PLACEMENT INSTRUCTIONS
CAUTION: Logs are fragile, handle with care. Log #1 (2282-701): Locate log placement notch on the bottom of log #1.
See Figure 2. Mate outer notches on the bottom of Log #1 with the left and right grate tines. Slide Log #1 toward the rear
of appliance until back side of Log #1 contacts the log placement tabs shown in Figure 1. See Figure 3.
Figure 3.
Log #2 (2282-702): Locate log placement notches on the bottom of Log #2. See Figure 4. Mate notches on the bottom of
Log #2 as shown in Figure 5. Notch on front of log will contact right front grate tine and notch on right side of log will contact
front inside corner of side grate tine.
LOG PLACEMENT TABS
LOG PLACEMENT TABS
Figure 1.
Figure 2.
LOG PLACEMENT NOTCH
LOG PLACEMENT NOTCH
Figure 4.
Figure 5.
LOG PLACEMENT SLOTS
LOG PLACEMENT SLOTS
1
1
2
2
1
1
1
1
2
2
NOTCH FOR LOG #3
NOTCH FOR LOG #3
NOTCH FOR LOG #6
NOTCH FOR LOG #6
BURNED AREA
BURNED AREA
3
3
2
2
NOTCH FOR
NOTCH FOR
LOG #4
LOG #4
LOG CONTACTS
LOG CONTACTS
GRATE TINE
GRATE TINE
FLAT AREA
FLAT AREA
FOR LOG #3
FOR LOG #3
NOTCH
NOTCH
NOTCH FOR
NOTCH FOR
LOG #4
LOG #4
NOTCH FOR
NOTCH FOR
LOG #3
LOG #3