Filter
Top Products
57
Heat & Glo •
TRUE-36, TRUE-42, TRUE-50 • 2282-900 Rev. D • 8/12
2281-935
Figure 11. Figure 12.
Figure 13.
Figure 16. Log Set Installed.
4
4
2
2
6
6
5
5
1
1
3
3
Log #6 (2281-706): Place Log #6 into appliance as shown in Figure 12. Base of log will sit on bottom refractory and notch
on log will rest against grate tine. Lean top of log into notch on Log #1. See Figure 2.
BURNED
BURNED
PORTION
PORTION
6
6
7
7
(LOG #7 ON TRUE-42 ONLY)
(LOG #7 ON TRUE-42 ONLY)
NOTCH
NOTCH
6
6
BACK TINE
BACK TINE
FRONT TINE
FRONT TINE
LOG CONTACTS REFRACTORY
LOG CONTACTS REFRACTORY
Log #7 (2281-707 TRUE-42 ONLY): Place Log #7 into appliance as shown in Figure 13. Right side of log should contact
right refractory and burned portion of log should be centered between front and back tines.
Log #8 (2281-708): Place Log #8 into appliance as shown in Figure 15. Left notch will contact left grate tine and base of log
will rest on bottom refractory.
LOG RESTS AGAINST
LOG RESTS AGAINST
GRATE TINE
GRATE TINE
8
8
Figure 14.
7*
7*
8
8
Figure 15.
8
8
LOG CONTACTS
LOG CONTACTS
GRATE TINE
GRATE TINE
NOTCH
NOTCH
6
6
4
4
5
5
*LOG #7 TRUE-42 ONLY
*LOG #7 TRUE-42 ONLY