Filter
Top Products
It’s time you got maximum use and enjoyment out of your fireplace. That’s what a direct vent
gas insert is all about. These airtight, energy-wise models are AFUE rated and exceedingly more
efficient than woodburning fireplaces. Plus, they’re easy to use. No wood to chop, no ashes to
sweep. Inserts can even be run on a thermostat. Just flip a switch and enjoy.
Select from six models, each with a different combination of size, heat output and log style.
Three are molded from our patented FireBrick
®
material. Three are made from aluminized steel.
Just four easy steps
Step 1 Measure your replace
We’ll need the height, width and depth of the fireplace
opening to ensure that the proper sized insert is selected.
Convert a cold, drafty fireplace into a warm, airtight unit.
Direct Vent Gas Fireplace Inserts
Distance from Firebox to Mantel
Back Width
Depth from front to back
Front Width
Height from
hearth to top
of the opening
Measure height, width and depth
Our exclusive FireBrick
technology creates a
one-piece, seamless,
masonry-like rebox
with an embedded brick
pattern. It also radiates
more heat into the room
than a steel insert.
Our aluminized steel
rebox is more durable
and has a higher
heat tolerance than
products made with
galvanized steel.
FireBrick Insert Aluminized Steel Insert
1) Measure your fireplace
2) Choose your insert
3) Cover the gap
4) Finish with a front