Filter
Top Products
Heatilator • Eclipse • 4049-229 Rev F • 11/08 19
5
5
Framing and Clearances
A. Selecting Appliance Location
When selecting a location for the appliance it is important
to consider the required clearances to walls (see Figure
5.1).
WARNING! Risk of Fire or Burns! Provide adequate
clearance around air openings and for service access. Due
to high temperatures, the appliance should be located out
of traffi c and away from furniture and draperies.
NOTICE: Illustrations refl ect typical installations and are
FOR DESIGN PURPOSES ONLY. Illustrations/diagrams
are not drawn to scale. Actual installation may vary due to
individual design preference.
36-7/8 in.
934 mm
Horiz Term
36 in./914 mm
3/4 in./19 mm
minimum
appliance
to combustibles
17-7/8 in.
454 mm
Drywall
36-7/8 in.
934 mm
36 in.
914 mm
Figure 5.1 Appliance Locations