Filter
Top Products
Quadra-Fire • Columbia Bay Insert • 7002-109 Rev. H • 10/08 19
G. Positioning the Logs
While still breakable, the logs do not become fragile until
after the appliance is burned and they have cured. After
curing, any handling must be done with care as breakage
can easily occur.
Note: Logs have been designed to work specifi cally with the
burner of this appliance. Exact placement will ensure proper
operation of your gas appliance and reduce sooting.
Complete log installation.
4
4
5
5
1
1
3
3
Figure 8.15
Figure 8.18
Figure 8.16
Figure 8.19
Left side
Right side
Figure 8.17
Figure 8.20
Figure 8.21
2
2
After installing brick, install rear log (#1) over locating pins
on log shelf, as shown.
Note: Locator pins are included in the log component
package.
Install cover for refractory supports on left and right sides.
Install left log (#2) over locating pins on burner.
Install right log (#3) in empty space on burner.
Install "S" shaped log (#4) on pins on right and rear logs.
Install left twig (#5) on pin in left log resting just under "S"
shaped log.