Filter
Top Products
Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 61
G. Log Assembly
• Base logs have been permanently mounted on the grate
assembly and should not be moved.
Place the Rockwool
• See Figures 14.1 and 14.4.
• Place a small amount of 1/2 in. diameter pieces
(dime-size) of rockwool on the burner pan so that
rockwool touches but does not cover the holes in the
burner pan.
• It is not necessary to use the entire bag. Save the
remaining amount for future use.
Figure 14.7 Placing Right Top Log
Figure 14.5 Base Logs
Figure 14.6 Placing Left Top Log
Figure 14.4 Placement of Rockwool
• Install “Y” log on left hand side of grate using locating
pins to position.
• Install right top log as shown in Figure 14.7 using locating
pins to position log properly.