Hearth & Home Technologies Inc. 800 W.
Jefferson, Lake City, MN 55041.
CRESTFIRE SERIES ELECTRIC FIREPLACE
5
10/03
4030-239 Rev G
Figure 2 shows a typical framing of this appliance using combustible materials. All required clearances to combustibles must be
adhered to. Header height is measured from the base of the appliance.
D. FRAMING
Figure 2 - Framing
CAUTION:
Provide adequate clearances around the air openings
and adequate accessibility clearances for servicing and
proper operation.
Tools and building supplies normally required for
installation:
Tools: Building Supplies:
Saw Wall-finishing materials
Pliers Framing material
Hammer Surround
Phillips screwdriver Caulking material
Tape measure
Level
Electric drill/bits
Square
Gloves