Hearth and Home Technologies 8040 04-28-04 Stove User Manual


 
HearthStone Quality Home Heating Products Inc ® Tribute Model 8040
21
GLASS
DOOR
1/4" ROPE
GASKET
GLASS CLIP
GLASS
CLIP
PAD
SCREW
3/8" ROPE
GASKET
the cleaner to penetrate rather than running off the surface
of the glass. Wipe the cleaner off with a soft cloth, or black
& white newsprint.
Important: scratching or etching the glass will
weaken the integrity of the glass. Do not use a razor
blade, steel wool, or any other abrasive material to
clean the glass. Use low alkaline content cleaners
only.
The front door glass is a ceramic, shock-resistant glass,
made specifically for use in woodstoves. Do not use any
replacement glass other than the ceramic glass
manufactured and supplied for use in this woodstove.
Replacement glass is available through your local dealer.
The door glass should be replaced immediately if broken or
chipped. Contact your local dealer for replacement glass,
which is accompanied with instructions and everything
needed for the repair. If you replace the glass yourself,
wear work gloves and safety glasses.
The procedure for glass and glass gasket replacement is as
follows:
1. Remove the door by lifting it straight up off the
hinges with the hinge pins remaining in the door.
2. Place the door face down on a flat, smooth surface,
other than the floor, with the handle hanging over
the edge.
3. Apply penetrating oil to the screws in the glass
retainer clips. Remove the screws to separate the
glass from the door.
4. Carefully lift the damaged glass and/or old gasket
from the door frame and discard.
5. Peel the paper backing from the tape gasket.
Apply the new gasket to the door frame as
illustrated on page 17.
6. Place the gasketed glass onto the door. Place a
new clip and gasket square around the glass, and
over the screw holes in the clip.
7. Screw the glass retainer clips (6) back on the door.
8. Install the door.