Filter
Top Products
8
Dry Seasoned Wood Only! 3-90-798 Save These Instructions
1. Place the appliance in a location near the
nal installation and follow the procedures
below:
2. Open the appliance and remove all articles
packed inside. Inspect all items for shipping
damage. Notify dealer of any missing or
damaged goods.
3. All safety warnings have been read and
followed precisely.
4. This Owner's Manual has been read in it's
entirety.
5. Floor protection requirements have been
read and followed.
6. The ue connector has been installed in
accordance with the instructions herein.
7. The proper clearances from the appliance
and chimney connector to combustibles
have been met.
8. The masonry chimney has been cleaned
and inspected by a professional, or the
factory built metal chimney is installed
according to the manufacturers instructions.
9. The chimney meets the minimum height
requirements.
10. All labels and hang tags have been removed
from the glass.
11. All plated surfaces have been wiped clean,
if applicable.
12. The optional air distribution blower
has been installed properly.
13. A properly grounded electrical receptacle is
available within reach of the blower's power
cord (if installed).
There are two brick clips located in the Owner’s manual bag. With the bricks in place, install the clips in the front corners
as shown. The long portion of the clip will t between the brick and the wall of the stove, with the short hook over-hanging
to the inside of the rebox.