Filter
Top Products
SKU 46361 PAGE 8 REV 09/02
4. NOTE: The Remote Control requires a 9 Volt battery. To install a 9 Volt battery in
the Remote Control, remove the Battery Cover located on the back of the Remote
Control and connect the battery poles to the Battery Lead on the Remote Control.
Then, replace the Battery Cover. (See Figure E, and Assy. Diagram.)
5. To begin using the Remote Control (part #34) feature, turn the Power Switch
(part #19) to its “REMOTE CONTROL” position and leave it in that position.
Then, to turn the Air Filter System on, press the “ON” button located on the
Remote Control. To turn the Air Filter System off, press the “OFF” button located
on the Remote Control. (See Figure E, G, and Assy. Diagram.)
POWER SWITCH (#19)
NON-REMOTE
CONTROL
POSITION
REMOTE
CONTROL
POSITION
SWITCH PLATE
POWER CORD (#8)
FIGURE G
3A CIRCUIT BREAKER
REV 07/03