Filter
Top Products
5. Locate the desired ceiling location, and ceiling joists, upon which to attach the Air
Filter System.
6. With assistance and proper lifting equipment (not provided), raise the Air Filter
System to the desired ceiling location. Caution: Make sure all other people are
kept well clear of the surrounding area during this procedure.
7. Align the four Hangers (part #31) with the ceiling joists and measure for eyelet
bolt location. Then insert four eyelet bolts (not included) throught the ceiling into
the underside of the ceiling joists. Note: Eyelet bolts must be of a size that are
capable of safely supporting the weight of the Air Filter System. When hanging
the Air Filter System, make sure each Hanger fits completely inside the loop of
each eyelet bolt to insure a safe mounting of the Air Filter System. (See Figure
C, and Assy. Diagram.)
CEILING JOISTS
HANGER (#31)
FIGURE C
The Manual Power Switch And Remote Control:
1. The Air Filter System is equipped with a manual Power Switch (part #19) and a
hand held Remote Control (part #34). (See Figures D, E, and Assy. Diagram.)
POWER SWITCH (#19)
FIGURE D
SKU 46361 PAGE 6
CEILING
EYELET BOLT
(not included)
Air Filter System
Remote Control
(#34)
3A CIRCUIT BREAKER
REV 07/03