Filter
Top Products
Page 3SKU 95834 For technical questions, please call 1-800-444-3353.
Use safety equipment when using this tool. Wear ANSI-approved safety 4.
goggles and a NIOSH-approved respirator.
Do not force this tool. Use the correct tool for your application. 5. The correct
tool will do the job better and safer at the rate for which it is designed. Do not force
the product and do not use this product for a purpose for which it is not intended.
Store idle tools out of reach of children and other untrained persons. 6. Tools
are dangerous in the hands of untrained users.
Maintain this tool with care. Keep this tool clean.7. Properly maintained tools
are less likely to malfunction and are easier to control. Do not use a damaged tool.
Tag damaged tools “Do not use” until repaired.
Check for misalignment or binding of moving parts, breakage of parts, and 8.
any other condition that may affect this tool’s operation. If damaged, have
the tool serviced before using. Many accidents are caused by poorly maintained
tools.
Use only accessories that are recommended by the manufacturer for your 9.
model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.
Tool service must be performed only by qualied repair personnel. 10. Service or
When servicing a tool, use only identical replacement parts. Follow instruc-11.
tions in the “Inspection, Maintenance, And Cleaning” section of this manual.
Use of unauthorized parts or failure to follow maintenance instructions may create
a risk of injury.
Maintain labels and nameplates on the this tool. 12. These carry important infor-
mation. If unreadable or missing, contact Harbor Freight Tools for a replacement.
Do not operate the Fuel Injection Cleaner in a closed area or in a poorly ven-13.
tilated area. When a vehicle’s engine is running, the engine produces carbon
monoxide, a colorless, odorless, toxic fume that, when inhaled, can cause
serious personal injury or death. Whenever possible, use a carbon monoxide
detector (not included) to detect excessive carbon monoxide fumes in the work
area and in the surrounding area.
Release fuel system pressure before servicing fuel system components.14.
Firmly tighten all connections before cleaning injectors. Fuel leakage can 15.
cause a re.
To avoid spilling fuel on the engine, wrap a shop towel around the pressure 16.
tap ttings when connecting and disconnecting adapters. Pressurized fuel