Filter
Top Products
Page 4SKU 95834 For technical questions, please call 1-800-444-3353.
-
line fumes remain within the tool after use, and can create an explosion hazard.
Make sure to keep dirt and debris out of the fuel system when cleaning.17.
Prior to servicing injectors, make sure to read and understand all instruc-18.
tions and safety precautions as outlined in the vehicle manufacturer’s ser-
vice manual.
Replace the injector’s O-rings whenever injectors are removed. 19. Never exceed
recommended pressures when cleaning fuel injectors.
Use the Fuel Injection Cleaner only on fuel injected gasoline engines.20.
Protect painted surfaces from fuel or cleaner uid spills.21.
Keep tools, electrical cords, and hoses away from moving engine parts.22.
Wrap a shop towel around the tting when removing the cleaner assembly 23.
Hose.
Observe normal precautions for working with ammable liquids. No smok-24.
ing, open ames, electrical sparks, etc. Have a Class B re extinguisher
available while working on fuel injection systems.
Power using compressed air only. 25. Never use bottled gas as a power source.
Do not exceed 100 PSI operating pressure.26.
Do not apply pressure to the canister until ready to use.27.
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If
any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.