Harbor Freight Tools 94799 Home Security System User Manual


  Open as PDF
of 7
 
SKU 94799 For technical questions, please call 1-800-444-3353 Page 6
Arm Alarm System
On the Remote Control, press the ON button. The LED on the Remote Control will
temporarily turn on. This can be done from outside the house or other protected
structure.
Disarm Alarm System
On the Remote Control, press the OFF button. The LED on
the Remote Control will temporarily turn on. This can be
done from outside the house or other protected structure.
Troubleshooting
Problem Possible Cause Probable Solution
When system is armed,
one sensor does not sound
or signal Main Unit when
Magnet Strip is moved.
1.
Sensor is turned Off.
2.
Battery is dead.
3.
Main Unit is turned Off.
1.
Turn Sensor On.
2.
Replace battery.
3.
Turn Main Unit On.
One Sensor continues to
sound alarm even through
the door is closed.
Magnetic Strip is placed too
far from Sensor.
Move Magnetic Strip to within
¼” of the Sensor.
Main Unit does not detect
any intrusions from any
Sensors.
1.
Main Unit batteries are
dead.
2.
Main Unit is placed too
far from the Sensors.
1.
Replace batteries.
2.
Move Main Unit closer to
the Sensors.
Maintenance
1. Periodically test each Sensor and Main Unit for alarm indication and sound.
2. Periodically test each Remote Control for Main Unit activation and
deactivation.
3. Replace Main Unit batteries at least once a year. Replace other batteries as
required.
Remote Control
 previous