Filter
Top Products
SKU 93762 For technical questions, please call 1-800-444-3353. Page 17
When the Bandsaw is not in use over 2.
long periods of time, release the ten-
sion on the Saw Blade (82).
Adjusting The Feed Rate:
FIGURE Q
HANDLE
(127)
The feed rate of the Body Frame (60)
can be adjusted by turning the Han-
dle (127) clockwise to decrease the
feed rate or counterclockwise to in-
crease the feed rate. Do not turn the
Handle more than one turn at a time.
Excessive feed pressure can break
the Saw Blade (82). Insufcient feed
pressure dulls the Saw Blade rapidly.
(See Figure Q.)
Adjusting The Blade Guide Brackets:
BLADE GUIDE BRACKETS
(90, 102)
GUIDE
ADJUSTING
KNOB (45)
FIGURE R
1. The Right Blade Guide Bracket (90)
and Left Blade Guide Bracket (102)
are adjustable by loosening the
Guide Adjusting Knob (45) and sliding
the Brackets up or down to accom-
modate the depth of the workpiece.
(See Figure R.)
The Blade Guide Brackets (90, 102) 2.
should be set as close as possible
to the workpiece, without interfering
with the workpiece or contacting the
Machine Bed (142). (See Figure R.)
Once the adjustment is made, make 3.
sure to re-tighten the Guide Adjusting
Knob (45). (See Figure R.)