Filter
Top Products
SKU 93662 For technical questions, please call 1-800-444-3353. Page 2
SPECIFICATIONS
Pump Type Centrifugal / Requires Priming
Maximum Flow 145 GPM
Maximum Head Discharge 86 Feet
Maximum Suction Lift 26 Feet
Pump Speed 3600 RPM
Inlet/Outlet Size 2”
Engine 5.5 HP / Recoil Start
Air Cooled / 4-Stroke Overhead Valve / Single Cylinder
Engine Model: JF-168
Displacement: 163cc
Fuel Required: Unleaded Gasoline
Fuel Tank Capacity: 0.78 Gallons
Oil Capacity: 0.63 (Approx. 2/3) Quart
Operating Capacity: Approximately 2.8 Hours On Full Fuel Tank
EPA Compliant: (JDG-NRSI-04-02)
CARB Certication: (2004-CA S.I. SORE’s Compliant)
Accessories 2” Inlet Plastic Strainer / Wire Hose Clamps (Qty. 3) / Spark Plug Socket
2” x 2-1/2” Hose Adapters w/Screw On Caps & Washers (Qty. 2)
Net Weight 56 Pounds
The Emission Control System for this pump’s engine is warranted for standards set by the
U.S. Environmental Protection Agency and by the California Air Resources Board (also
known as CARB). For warranty information, refer to the back two pages of this manual.
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES AND PRECAUTIONS
WORK AREA
Keep your work area clean and well lit. 1. Cluttered benches and dark areas invite
accidents.
2. Do not operate power tools in explosive atmospheres, such as in the
presence of ammable liquids, gases, or dust. Power tools create
sparks which may ignite the dust or fumes.
Keep bystanders, children, and visitors away while operating a power tool. 3.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.