Filter
Top Products
SKU 92038 For technical questions, please call 1-800-444-3353. Page 4
14. Maintain Pumps with care. Keep them clean. Do not use a damaged Pump.
Tag damaged Pumps “Do not use” until repaired.
15. Check for, breakage of parts and any other condition that may affect the
Pump’s operation. If damaged, have the Pump serviced before using.
Many accidents are caused by poorly maintained Pumps.
16. Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one Pump may become hazardous
when used on another Pump.
SERVICE
17. Pump service must be performed only by qualified repair personnel.
Service or maintenance performed by unqualified personnel could result in a risk
of injury.
18. When servicing a Pump, use only identical replacement parts. Follow
instructions in the
“Inspection, Maintenance, And Cleaning”
section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
1. Maintain labels and nameplates on the Pump. These carry important
information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
2. Always wear ANSI approved safety impact eye goggles and heavy work
gloves when using the Pump. Using personal safety devices reduce the risk
for injury. Safety impact eye goggles and heavy work gloves are available from
Harbor Freight Tools.
3. Maintain a safe working environment. Keep the work area well lit. Make sure
there is adequate surrounding workspace. Always keep the work area free of
obstructions, grease, oil, trash, and other debris. Do not use an Electric Pump in
areas near flammable chemicals, dusts, and vapors. Do not use this product in a
damp or wet location.
4. Avoid unintentional starting. Make sure you are prepared to begin work
before turning on the Pump.
5. All hydraulic hoses and hydraulic systems to be used with this pump must
be rated at a working pressure of at least 2200 PSI.
6. Never leave the Pump unattended when it is plugged into an electrical
outlet. Turn off the Pump and unplug it from its electrical outlet before leaving.