Harbor Freight Tools 92038 Water Pump User Manual


 
SKU 92038 For technical questions, please call 1-800-444-3353. Page 5
7. Make sure the Oil Tank (13) is completely filled with a high quality hydraulic
oil prior to use.
8. This Pump should be mounted in a properly vented area at least 18 inches
above the floor.
WARNING!! Allow 2 seconds between motor starts. Failure to comply may
burn out the motor.
9. Always unplug the Pump from its electrical outlet before performing any
inspection, maintenance, or cleaning procedures.
10. WARNING! People with pacemakers should consult their physician(s)
before using this product. Electromagnetic fields in close proximity to a heart
pacemaker could cause interference to or failure of the pacemaker.
GROUNDING
The Power Cord requires the attachment of a 220 volt, grounded, 3-Prong Plug
(not included). For safety purposes, only a qualified, certified, electrician should
attach a Plug to the Power Cord. Never modify the Plug in any way. To comply with
the National Electric Code, and to provide additional protection from the risk of
electrical shock, this product should only be connected to a 220 volt electrical outlet
that is protected by a Ground Fault Circuit Interrupter (GFCI).
WARNING!