Filter
Top Products
SKU 66163 For technical questions, please call 1-800-444-3353. Page 4
low persons unfamiliar with the
Auto Vacuum or these instructions
to operate the power tool. Power
tools are dangerous in the hands of
untrained users.
Maintain Auto Vacuum. Check for e.
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool’s operation. If dam-
aged, have the power tool repaired
before use. Many accidents are
caused by poorly maintained power
tools.
Use the Auto Vacuum and its ac-f.
cessories in accordance with
these instructions, taking into ac-
count the working conditions and
the work to be performed. Use of
the power tool for operations different
from those intended could result in a
hazardous situation.
Service5.
Have your Auto Vacuum serviced a.
by a qualied repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
Additional Safety Warnings
To avoid accidental res, do not 1.
vacuum anything that is burning
or smoking such as cigarettes,
matches, hot ashes, etc. Do not
attempt to vacuum combustible or
ammable liquids.
Maintain labels and nameplates 2.
on the Auto Vacuum. These carry
important safety information. If un-
readable or missing, contact Harbor
Freight Tools for a replacement.
Avoid unintentional starting.3. Pre-
pare to begin work before turning on
the Auto Vacuum.
Do not leave the tool unattended 4.
when it is plugged into a vehicle’s
cigarette lighter accessories out-
let. Turn off the tool, and unplug it
from its electrical outlet before leav-
ing.
5. This product is not a toy.
Keep it out of reach of
children.
People 6.
with pacemakers should consult
their physician(s) before use.
-
imity to heart pacemaker could cause
pacemaker interference or pacemak-
er failure. In addition, people with
pacemakers should:
on.
avoid electrical shock.
grounded. Ground Fault Circuit Inter-
rupter (GFCI) should also be imple-
mented – it prevents sustained elec-
trical shock.
The warnings, precautions, and 7.
instructions discussed in this in-
struction manual cannot cover all
possible conditions and situations
that may occur. It must be under-
stood by the operator that common
sense and caution are factors which
cannot be built into this product, but
must be supplied by the operator.
SAVE THESE
INSTRUCTIONS.