Filter
Top Products
3
Product Specification
Minimum incoming water pressure 21.75 psi
Recommended incoming water pressure 29 - 72 psi
Max. hot water temp 176
o
F*
Recommended hot water temp. 120
o
F - 140
o
F*
Max. flow rate handshower 2.5 gpm
bodysprays < 1 gpm each
Supplies 1/2” NPT hot and cold
Protection against back siphonage provided by check valves in handshower outlet, and in the hot
and cold supply elbows. The check valves should be removed and inspected yearly.
This showerpanel is for installation on a flat wall only. It is not possible to mount it in a corner.
*Know and follow all applicable local plumbing codes when setting the temperature on the water heater. In Massachussets,
the water heater may be set no higher than 112
o
F.
Using the Shower Panel Controls
There are four handles on the side of the shower panel.
The top handle controls the handshow-
er. Turn the handle counter- clockwise
to turn the water on, clockwise to turn
the water off.