Filter
Top Products
6
Seal the wall around the elbows
with waterproof sealant.
Failure to seal the wall can lead
to possible water damage.
Installation
Wrap the threads on the nipples with Teflon tape.
Install the elbows. The elbow outlets should face
downward.
Drill the holes for the mounting screws with an 8 mm
bit.
Seal the wall around the anchors
with waterproof sealant.
Failure to seal the wall can lead
to possible water damage.
Install the screws. Install the nuts. There should be
9/16” between the rear of the nut and the surface of
the wall.
Do not drill into water lines!
Install the anchors.