Filter
Top Products
2
Technical Information
Recommended water pressure 14.7 - 72.5 psi
Minimum water pressure 29 psi
Max. water pressure 147 psi
Recommended hot water temp. 120� - 140� F*
Max. hot water temp 165�F*
Max. flow rate:
showerhead 2.5 gpm
handshower 2.5 gpm
neck spray 2.5 gpm
bodysprays 0.72 gpm each
Thermostatic temperature control
The high temperature limit stop on the thermostatic
mixing valve may be reset to comply with local plumb-
ing codes -- please refer to the installation instruction
manual.
Protection against back siphonage provided by check
valves. The check valves should be removed and
inspected yearly (see page 8).
This panel may be used with an instantaneous water
heater if the heater is at least 24 kW and the output is
at least 3 gpm @ 30 psi pressure. However, only one
panel function may be used at a time.
*Please know and follow all applicable local plumbing codes when
setting the temperature on the water heater. In Massachusetts, the water
heater may be set no higher than 112�F.
•
•
•
•
showerhead
handshower
neck spray
bodysprays
foot rest