Filter
Top Products
11
• Make sure that the cord or other
objects are
not trapped
under the
water
tank.
The Filler Cap Is Difficult to Remove
• Sometimes a vacuum can form in
the tank,
especially
if it has not
been seated
on the base
for a long
period of
time. Press
the button
in the center
of the filler cap to relieve the vacuum.
• Apply 100% pure petroleum jelly
to the filler cap gasket. Wipe off
any excess.
Fan Enclosure or Tank Does Not Fit on Base
Press here
The Tank Is Full But the Tray Does Not Fill
• Is the cord or another object trapped
under the tank? Make sure that the
tank is properly seated on the base
and that the power cord is routed
correctly. If the tank will not seat prop-
erly, see “Fan Enclosure or
Tank Does Not Fit on Base.”
840117800 Ev00 8/27/03 11:14 AM Page 11