Haier HCFU-42CA13 Air Conditioner User Manual


 
GUIDE TO OPERATION
16
about 6 hrs
1 hr
1 hr
increase 1
increase 1
LOCK
RESET
Press SLEEP button once to make the air conditioner have the previous-set
sleep time (first power-on is "1h"), the sleep symbol will appear. Press time
button / , you can choose the time in 1~8 hours. Each press of / ,
the time increases/reduces 1 hour and "Xh" appears in the temperature
setting part, "OFF" appears in "TIMER OFF" display part and timer-off
time; press SLEEP button again to cancel sleep function, the sleep symbol
diappears.
C
C
C
C
C
C
C
C
C
C
Comfortable Sleep
At night, before going to bed you can press down the SLEEP button on
the controller and the air-conditioner will run by the comfortable sleeping
mode to make you sleep more comfortable.
One hour after sleeping operation start, the temp. is 1 higher than
the setting one. After another hour the temp. rises 1 and then run
continuously for another 6hrs' and then close. The actual temp. is higher
than the setting one which is to prevent from being too cool to your sleep.
In cooling, dehumidifying mode
One hour after start up, the temp. decrease 2 lower than the setting one.
After another hour decrease by more 2 .
The temperature will automatically rise by 1 after another 3hrs' operation,
and then automatically close after 3hrs' continuous operation.
The actral temperature is lower than the setting one which is to prevent
from being too hot to your sleep.
In heating mode
Note:
In AUTO mode, unit will run in SLEEP function according to the operation mode.
After setting SLEEP function, it is forbidden to calibrate clock.
If the set sleep-time does not reach 8 hours, the unit will stop operation automatically after set
time is complete.
Set "TIMER-OFF" function first, then set SLEEP, and the sleep-set is performance; set TIMER-ON
function first, the sleep function can only be set before TIMER-ON; if set theSLEEP function first,
the TIMER function can not be set.
After setting SLEEP, press CLOCK button to show the time; press TEMP. button to show the
temperature; press again to change temperature.
TEMP
SWING
FAN
ON
OFF
MODE
SLEEP
SET
CLOCK
TIMER
SETTING T
SLEEP RUN BEGINS SLEEP RUN STOPS
1 hr
1 hr
3 hrs
about 3 hrs
decrease 2
decreases 2
increase1
SHUT DOWN
SLEEP RUN STOPS
Heat mode
SLEEP RUN BEGINS
SETTING T
SHUT DOWN
Cooling mode
OFF
AM