Filter
Top Products
GUIDE TO OPERATION
15
Adjusting up/down air flow direction
Up/down direction can be adjusted by using the SWING button on the remote controller.
Each time pressing this button, the mode changes in the following sequence.
Change to the AIRFLOW mode.
Louver moves in upward
and downward directions
continuously.
Avoid direct air flow to the body for
many hours.
Avoid downward blowing operation
of cooling mode for many hours.
Do not touch the swing louver during
swing operation.
Please use the Swing button of remote
controller. If adjusted by hand, it would
cause an injure.
(Only for 28,42 series.)
CAUTION
SWING
No indication
(louver stopped)
SWING
LOUVER STOPPED
When the LOUVER button is
pushed during SWING mode,
it stops swinging at the just
angle.
Recommendable stopping angle of the louver
COOL
and
DRY
HEAT
(Horizontal Blowing)
(Downward Blowing)