Filter
Top Products
ON/OFF
Mode
Fan Speed
Swing
Temperature
Clock
Timer
Set
Sleep
Aux.Heat
Fileter Reset
Reset
6
2
1
3
4
1
4
2
3
Operation instruction
Fan operation
Turn on the unit
Press the ON/OFF button to turn on the
unit The LCD display of the wire
controller will show the previous
working state (except for Timer, Sleep,
Swing mode), the operation indicator
light on the wire controller will light up.
Choose of working mode
Press MODE button, each press the working
mode will change as the following sequence:
AUTO COOLING DEHUMIDIFYING
HEATING FAN,
Choose FAN operation.
Adjusting FAN SPEED
Press the FAN SPEED button to change fan
speed:
Choose the desired fan speed
Turn off the unit
Press the ON/OFF button to turn off the unit.
The wire controller only shows the clock and
room temperature.
LOW FAN MED FAN HIGH FAN
AUTO COOLING DEHUMIDIFYING HEATING FAN
About FAN operation
FAN operation refers the air conditioner does not perform COOLING and HEATING
operation, but FAN operation. In this mode, the air conditioner cannot perform
AUOT FAN operation, and does show the temperature value on the wire controller.
LOW FAN MED FAN HIGH FAN