Filter
Top Products
9
** ** **
**
**
**
**
**
**
****
**
**
**/**
5
6
OFFON OFFON
AM
PM
AM
PM
Operation instruction
Timer On-Off function
After turning on the unit,
set the proper working mode
The LCD of the wire controller
will show working mode.
(except for Timer, Sleep, Swing)
Set of TIMER mode
Press the TIMER button to change the TIMER
mode, each press the TIMER mode will change
as the following sequence:
Then choose the TIMER ON-OFF mode.
At this time the ON will flash.
Set the TIMER ON time
Press the time adjusting button
Each press, the set time increases 10 minutes. If depress the button,
the time will increase rapidly.
Each press, the set time decreases 10 minutes. If depress the button,
the time will decrease rapidly.
The LCD shows the time set.
It can be adjusted arbitrarily in 24 hours. (AM refers to morning,
4. Confirm the time
After adjusting time, press SET button to confirm time.
At this time, the ON will not flash, OFF begins to flash.
The time displayed is: at x oíclock x minutes the unit will be turned
3.
2.
1.
Set the TIMER OFF time
Press the TIME button, the adjustment method is the same as
the one of setting TIMER ON time.
5.
Confirm the time of TIMER OFF
After adjusting time, press SET button to confirm time.
At this time, the OFF will not flash.
The time displayed is: at x oíclock x minutes the unit
will be turned off.
6.
Cancel TIMER
Press the TIMER button several times until the TIMER mode display disappears.
According to the sequence of TIMER ON & TIMER OFF setting, you can realize
turning on unit first, then turning off unit.