Haier AD092XLERA Air Conditioner User Manual


 
3
WARNING!
Carefully read the following information in order to operate the air conditioner
correctly.
Below are listed three kinds of Safety Cautions and Suggestions.
Be sure to conform with the following important Safety Cautions.
The Safety Cautions should be at hand so that they can be checked at any time when
needed.
If the conditioner is transferred to the new user, this manual should be as well transferred
to the new user.
Safety precautions
Otherwise the one will feel unpleasant or harm
ones' health.
If any abnormal phenomena is found (e. g.
smell of firing), please cut off the power
supply immediately, and contact the dealer
to find out the handling method.
In such case, to continue
using the conditioner will
damage the conditioner,
and may cause electrical
shock or fire hazard.
When need maintenance and repairment,
call dealer to handle it.
Please let the dealer be responsible for
installing the conditioner.
Incorrect installation may cause water leak,
electrical shock and fire hazard.
Don't put fingers or any other things into
the inlet/outlet and swing louver while the
conditioner is in operation.
Because the highspeed fan is very dangerous
and may cause injuries.
Call the dealer to take measures to prevent
the refrigerant from leaking.
If conditioner is installed in a small room, be
sure to take every measure in order to prevent
suffocation accident even in case of refrigerant
leakage.
When conditioner is deinstalled or reinstalled
dealer should be responsible for them.
Incorrect installation may cause water leaking,
electrical shock and fire hazard.
Don't blow the human body with the cooling
air too long, and don't let the room
temperature decrease too low either.
WARNING!
Incorrect operations may result in severe consequences of death or serious injuries.
CAUTION!
Incorrect operations may result in injuries or machine damages; in some cases may
cause serious consequences.
switch
off
INSTRUCTIONS:
These information can ensure the correct operation of the machine.
Incorrect mainten-
ance and repairment
may cause water
leak, electrical shock
and fire hazard.