Filter
Top Products
19
Carry out this operation only when the remote
controller is defective or lost.
Unit start
When the emergency operation switch is
pressed, a sound you can hear, which
means the start of this operation.
Follow the requirements below.
Room
temperature
Designated
temperature
Timer
mode
Air flow
speed
Operation
mode
Anion
None
None
AUTO
AUTO
None
None
COOL
HEAT
>23
o
C
*23
o
C
23
o
C
26
o
C
Unit stop (to cancel emergency operation)
Press the emergency switch and hear a sound, the unit stops.
TEST OPERATION
Use this switch in the test operation when the room
temperature is less 16
o
C, do not it in the normal
operation.
Unit start
Unit stop(to cancel test operation)
Push the test run switch or operate with remote controller to cancel the test run.
If you use the remote controller to cancel the test run, the conditioner will then run as
per the working mode displayed on the remote controller.
POWER
TIMER
RUN
ON/OFF
EMERGENCY SWITCH
POWER
TIMER
RUN
ON/OFF
TEST SWITCH
Continue to press the test operation switch
for more than 5 seconds. After you hear the
"BI" sound twice, release your finger from
the switch, the test operation starts and the
air conditioner starts with the air flow speed
setting "Hi".
Operation
EMERGENCY OPERATION AND TEST OPERATION
EMERGENCY OPERATION