Filter
Top Products
1
1
RC-1000 Thermostat Installation Instructions
DESCRIPTION
The RC-1000 is a precision digital thermostat designed for 24 VAC heating and cooling systems. The
RC-1000 will support the following systems:
¾ Single Stage Heat/Cool Conventional
¾ Heat Pump (2 Stage Heat / 1 Stage Cool)
¾ Dual Fuel Heat Pump (2 Stage Heat / 1 Stage Cool)
The RC-1000 has the capability of being controlled both locally and by remote control. It offers
programmability, stand-alone operation, and robust, optically isolated communications with automation
systems, utility control systems, and personal computers.
Electrical rating: 24 V; 2 A; 50/60 Hz
Maximum current: 2 A on any circuit, 3 A total
The following requirements must be observed for installation in Europe: CE
1. This equipment must be installed in accordance with National wiring rules for the country in which it is
installed.
2. All product labels, instructions and markings relating to safety must be translated to a language, which is
acceptable in the country in which this equipment is to be installed.
INSTALLATION
Before installing this thermostat:
1. Read all of the Installation Instructions carefully.
2. Read the Owner's Manual carefully.
3. Ensure that this product is suitable for your application.
4. Ensure that wiring complies with all codes and ordinances.
5. Disconnect power to the control transformer to prevent electrical shock and damage to equipment.
6. Select an appropriate location to ensure an accurate temperature reading.
Document Number 65I00-1 / Rev A / April, 2008
Copyright
¤
2008 Home Automation, Inc.
All Rights Reserved