Filter
Top Products
To Remove
Carpet Glide
15
White spot left on floor.
Unit does not emit steam.
Water left on floor.
Unit not operating.
• When cleaning do not leave unit in one spot for too long.
• Use protector pad / oor mat when unit is ON and stationary.
• Use distilled water instead of hard tap water.
NOTE: To remove spot, use a damp cloth with a few drops of white vinegar
to rub and remove stain.
• Ensure water tank is lled with water.
• Change the Ultra-microber pad.
• Ensure unit is always level and parallel to the oor.
• Ensure plug is set rmly in outlet.
• Replace fuse or reset breaker.
Problem Solution
Troubleshooting