Haan SS-25 Carpet Cleaner User Manual


 
10
IMPORTANT
This product is NOT for space heating purposes.
CAUTION
CAUTION
Use only a heavy duty extension cord rated for 15 amps minimum – DO NOT use an
ordinary extension cord.
HAAN
®
floor care products emit steam at 212º to sanitize the area of use. This
means that the steam head, Ultra-microfiber pads, scrubbing brushes and carpet
glide get very hot during use. Care should be taken when using this appliance and
DO NOT touch components of this machine during use except in the approved man-
ner as outlined in this manual.
Before Using the Multiforce Pro™
Be sure to read ALL instructions and warnings before using
the Multiforce Pro™.
Helpful Hint:
To extend the life of your Ultra-Microfiber
Pads, always place your unit on the floor
protector/resting mat while the unit heats
up. Attach the Ultra-Microfiber pads when
the unit is ready to use.
Helpful Hint:
When heated, never leave the appliance in
one spot on any surface for any period of
time. Always place the Multiforce Pro™
on the Floor Protector/Resting Mat when
stationary.
Helpful Hint:
Always empty water from water tank
after use. To ensure optimum prod-
uct function use Fresh Rinse
once a
month.
Helpful Hint:
When using the Multiforce Pro™ with
the Carpet Glide it will not lift all set-in
stains from your carpet. Our patented
Ultra-microfiber pads may be used to
act as a “blotter” for removing most
fresh, wet spills and stains.
The Multiforce Pro™ is designed to clean hard floor surfaces that will withstand
high heat. Do not use on unsealed wood or unglazed ceramic floors. On surfaces
that have been treated with wax or some no-wax floors, the sheen may be removed
by the heat and steam. It is always recommended to test an isolated area of the sur-
face to be cleaned before proceeding. We also recommend that you check the use
and care instructions from the floor manufacturer.
WARNING