Filter
Top Products
Before Using Your Handheld Steam Cleaner
Be sure to read ALL instructions and warnings before using
your Handheld Steam Cleaner.
After plugging in the power cord and beginning to heat, a fixed amount of water is
released due to the build-up of internal pressure. After heating is complete, spray
the steam 2 to 3 times before affixing or switching any additional attachment.
Using Your Handheld Steam Cleaner - Operating Instructions
1
1
2
Push all the way down on the
Pressure Locking Safety Cap.
While cap is pressed, turn
counterclockwise to unlock.
Continue turning until the cap
is loose.
2
Remove Pressure Locking
Safety Cap.
3
Fill the Measuring Cup with
300ml of water and pour into
the water tank.
CAUTION
CAUTION
CAUTION
CAUTION
Use a grounded receptacle. Use only a heavy duty extension cord rated for 15 amps
minimum – DO NOT use an ordinary extension cord. To provide continued protec-
tion against the risk of electric shock, connect to a properly grounded outlet only.
After use, pressure will exist within the product. Press the Control Trigger to elimi-
nate this pressure prior to opening the Pressure Locking Safety Cap.
The handheld steam cleaner is designed to clean hard surfaces and upholstery that
will withstand high heat. DO NOT use on soft plastic and cold glass. On surfaces
that have been treated with wax, or on some no-wax floors, the sheen may be
removed by the heat and steam action. DO NOT use on unsealed wood. This could
cause the wood panel to rise. It is recommended that an isolated surface area be
tested to verify suitability before proceeding to the rest of the area.