Filter
Top Products
Water leaks from nozzle.
Steam emitted when refill-
ing the water tank.
Unit does not emit steam.
Accessory is loose.
Unit not operating.
• Use no more than 300ml of water in the tank per use.
• Ensure unit is in an upright position.
• Wait until the start-up heating cycle is complete.
• Allow unit to completely cool before refilling.
• Pour water slowly when filling tank.
• Ensure water tank is filled with water.
• Reattach accessory and ensure it is tight and properly attached.
• Ensure plug is set firmly in outlet.
• Replace fuse or reset breaker.
Problem Solution
Troubleshooting