Filter
Top Products
White spot left on floor.
Unit does not emit steam.
Water left on floor.
Unit not operating.
• When cleaning do not leave unit in one spot for too long.
• Use oor protector/resting mat when unit is plugged in and stationary.
• Use distilled water instead of hard tap water.
NOTE: To remove spot, use a damp cloth with a few drops of white vinegar
to rub and remove stain.
• Ensure water tank is lled with water.
• Ensure a steam level has been selected.
• Ensure the handheld unit is not being held with the tip pointed upwards.
• Change the Ultra-Microber pad.
• Ensure unit is always level and parallel to the oor.
• Ensure plug is set rmly in outlet.
• Replace fuse or reset breaker.
Troubleshooting
Problem Solution