Filter
Top Products
Using Your Steam Cleaner - Operating Instructions
Before Using Your Steam Cleaner cont.
IMPORTANT
This product is NOT for space heating purposes.
CAUTION
CAUTION
Use only a heavy duty extension cord rated for 15 amps minimum – DO NOT use an
ordinary extension cord.
HAAN
®
floor care products emit steam at 212º to sanitize the area of use. This
means that the steam head, Ultra-Microfiber pads and carpet glide get very hot
during use. Care should be taken when using this appliance and DO NOT touch
components of this machine during use except in the approved manner as outlined
in this manual.
1
4
Assemble unit and place on
Floor Protector / Resting Mat.
Plug in the unit. This will turn
on the unit’s power in standby
mode.
2
5
Turn Water Tank Cap counter-
clockwise to remove. Use the
measuring cup to fill tank with
water.
To select the level of steam, press
the Steam Level Power Button
- one press for low steam, two
presses for medium steam and
three presses for high steam. If
you press the button four times, it
will return to standby mode with
no steam but with power. Wait 20
seconds for unit to heat up with
a steam level selected. Unit may
vibrate while heating.
3
6
Tighten cap by twisting
clockwise.
Gently place unit on Ultra-
Microfiber pad. You are now
ready to steam clean.
TURBO
TURBO