Filter
Top Products
13
RECOMMENDED WIRING AND USE OF CONDUIT
CAUTION
AUTOMATIC GATE
STAND CLEAR
1-800-543-GATE
®
Separate PVC Conduits
for power, receiver
and control wiring.
Roller Guard
Roller Guard
Operator
Conduit through the concrete pad.
Roller Guard
Separate PVC Conduits
for power, receiver
and control wiring.
Roller Guard
Roller Guard
Roller Guard
Conduit around the concrete pad.
CAUTION
AUTOMATIC GATE
STAND CLEAR
1-800-543-GATE
®
Operator
Run the low voltage wire and receiver wire through PVC conduit into the slider unit to protect it from lawn mowers,
weed eaters, grazing animals, etc. PVC conduit should be used for accessory wires such as loop detectors, key
pads, card readers or any other entry device.
WA
RNIN
G
W
A
R
N
IN
G
3/8"-16x3" Carriage Bolts
3/8" Lock Washers
& Nuts
48" x 2" sq. Legs
MOUNTING THE LEGS ON THE SLIDE GATE OPERATOR
STEP 1
Mount the legs on the slide gate operator
using the
3
/8” x 3” Carriage Bolts,
3
/8” Flat
Washers,
3
/8” Lock Washers, and
3
/8” Nuts.
See Illustration A.
Illustration A