Filter
Top Products
28
MAINTENANCE
GATE
Having a well maintained gate will ensure that the operator runs smoothly and safely. Make sure gate is hung
level and plumb. Check and adjust periodically. Lubricate rollers periodically with grease appropriate for the
coldest weather in your area.
SAFETY EDGES
Periodically test the safety edges to make sure they are functioning correctly. If they are not, discard and replace
immediately.
CONTROL DEVICES
From time to time, check to ensure that all of the control devices connected to the operator are functioning. This
is especially important for safety devices.
OPERATOR
Occasionally inspect the chain to ensure that it is well lubricated, and oil the chain as necessary. Use CHAIN
AND CABLE LUBE for best results. Check the gear sprockets and grease them as needed. Check the rollers
and spray oil on them as needed.
The GTO Slide Gate Operator is designed for minimum maintenance. However, for optimum performance and
safety, the following maintenance procedures should be taken: