Figure 117.
.%HfjVgZ
;ZcXZ
IVWaZ
Figure 118.
;ZcXZ
7gVX`Zi
HZiHXgZlh
AdX`Cji
GZVgGV^a
;ddi
4.
3. Figure 118
Clamping Pressure and Parallelism
To adjust the fence clamping pressure and
parallelism to the blade:
1.
2.
3.
Figure 119
Figure 119.
HZiHXgZlh
;ZcXZ
7gVX`Zi
4.
Step 5
5.
Note:If the front end of the fence needs to
be adjusted up or down, use the set screws
from Figure 118; however, turn them in
even increments and recheck the square-
ness afterwards.
To check/adjust the fence height and square-
ness to the table:
1.
2.
Figure 117
Step 3
Step 4