Figure 30.
Checking Fence Parallelism
1.
2.
Note: It's permissible for the back of the
fence to pivot outward not more than
1
⁄64" from
being parallel to the blade. This creates a
slightly larger opening between the fence and
the blade, at the rear of the blade, to reduce
the risk of workpiece binding or burning as
it is fed through the cut. Many woodworkers
intentionally set up their fence in this man-
ner. Keep this in mind before adjusting your
fence. For more details see Figure 121 on
Page 71.
Figure 31.
;ZcXZ^h
EVgVaaZaid
B^iZgHadi!
l]^X]^h
EVgVaaZaid
7aVYZ
B^iZgHadi
7aVYZ
;ZcXZ
Fence Scale
Fence AdjustmentsPage
69
Miter Slot to Blade Parallelism
Page 67
Fence Scale
Figure 32
Figure 32.