Filter
Top Products
The information contained herein is deemed accurate as of 3/7/2011 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 3Model G0690
Main Specifications:
Blade Information
Maximum Blade Diameter......................................................................................................................... 10 in.
Maximum Width of Dado...................................................................................................................... 13/16 in.
Blade Tilt...................................................................................................................................... Left 0-45 deg.
Arbor Size................................................................................................................................................. 5/8 in.
Arbor Speed...................................................................................................................................... 4300 RPM
Arbor Bearings.......................................................................................... Sealed and Permanently Lubricated
Cutting Capacities
Maximum Depth of Cut At 90 Degrees.................................................................................................. 3-1/8 in.
Maximum Depth of Cut At 45 Degrees................................................................................................ 2-3/16 in.
Maximum Rip To Right of Blade-Standard.......................................................................................... 29-1/2 in.
Maximum Rip To Left of Blade.................................................................................................................. 12 in.
Table Information
Floor To Table Height................................................................................................................................ 34 in.
Table Size Width........................................................................................................................................ 20 in.
Table Size Depth....................................................................................................................................... 27 in.
Table Size Thickness............................................................................................................................ 1-1/2 in.
Table Size With Extension Wings Width.................................................................................................... 40 in.
Table Size With Extension Wings Depth................................................................................................... 27 in.
Table Size With Extension Wings Thickness.........................................................................................1-1/2 in.
Distance Front of Table To Center Of Blade....................................................................................... 17-1/4 in.
Distance Front of Table To Blade At Maximum Cut............................................................................ 12-1/4 in.
Fence Information
Fence Type....................................................................................Camlock T-Shaped Fence with HDPE Face
Fence Size Length..................................................................................................................................... 48 in.
Fence Size Width.................................................................................................................................. 4-1/8 in.
Fence Size Height................................................................................................................................. 2-1/2 in.
Fence Rail Type................................................................................................................. Square Steel Tubing
Fence Rail Length...................................................................................................................................... 62 in.
Fence Rail Width................................................................................................................................... 2-3/4 in.
Fence Rail Height........................................................................................................................................ 2 in.
Miter Gauge Information
Miter Gauge Slot Type.............................................................................................................................. T-Slot
Miter Gauge Slot Size Width..................................................................................................................... 3/4 in.
Miter Gauge Slot Size Height................................................................................................................... 3/8 in.
Construction
Table....................................................................................................................... Precision Ground Cast Iron
Wings...................................................................................................................... Precision Ground Cast Iron
Trunnions............................................................................................................................................. Cast Iron
Base....................................................................................................................................... Pre-Formed Steel
Body Assembly...................................................................................................................... Pre-Formed Steel
Fence Assembly................................................................................................... Steel with HDPE Side Plates
Rails........................................................................................................................................................... Steel
Miter Guage.................................................................................................................. Cast Iron with Steel Bar
Guard....................................................................................................................................... Steel and Plastic
Other Related Information
Paint........................................................................................................................................... Powder Coated
Number of Dust Ports....................................................................................................................................... 1
Dust Port Size.............................................................................................................................................. 4 in.