Filter
Top Products
Step 9
Take your electric firebox out of its packaging and position it
between the 2 legs of the mantel.
The firebox comes with 3 metal brackets and 20 black screws.
These metal brackets must be attached to both the sides of the
firebox and the mantel to ensure that your firebox does not move
around as you use it. Two of the brackets have 2 large holes on
one side. These large holes line up with 2 screws on the side of the
firebox. The other screws provided must be inserted into the holes
at the other end of the bracket and into the firebox. The other side
of each bracket attaches to the mantel.
The third bracket has no holes on one side. That side should go up
against the firebox but should not be attached as the heater sits
right underneath the bracket. Only the mantel side should be
attached. Once you are close to the wall, plug the firebox into the
nearest outlet.
If you have any questions about the firebox please reference the
installation instructions that come with the unit. Please reference the
Quick Tips section of that instruction manual.
Step 10
You are now ready to position your mantel against the wall. This
step requires 2 people to move the unit.
Anti-tipping device
At this point you must attach the anti-tipping device to your mantel
and your wall. This device is a safety feature that will prevent your
mantel from tipping over if a weight is applied which can
unbalance the unit (like a child climbing onto it).