Filter
Top Products
Step 9
Take the wine cooler out of its packaging and position it in the right side storage compartment. Ensure
the plug is at the back of your mantel, ready to be plugged in before you position your mantel in place
up against the wall. Ensure the feet of the wine cooler are positioned in the holes for the feet on the
bottom panel of the storage compartment. This positioning will prevent the wine cooler door from
interfering with the storage compartment door
If you have any questions about the wine cooler please reference the installation instructions that come
with the unit. Please reference the Quick Tips section of that instruction manual.
Step 10
You are now ready to install the doors on the right and left side storage compartments. Locate the left
door. The hinge bracket for this door is already attached to the hinge located inside the left compart-
ment (it came installed). Get your helper to hold the door in position while you insert and tighten the 2
screws in each of the hinges. Repeat for the right side door. You can level the doors by releasing or
tightening the tension on the leveling screw on each hinge (see picture for location) and realigning the
door so it is level from the front.
Leveling screws